Upgrade procedure to Gluster 10, from Gluster 9.x, 8.x and 7.x
We recommend reading the release notes for 10.0 to be aware of the features and fixes provided with the release.
NOTE: Before following the generic upgrade procedure checkout the "Major Issues" section given below.
Refer, to the generic upgrade procedure guide and follow documented instructions.
Major issues
The following options are removed from the code base and require to be unset
before an upgrade from releases older than release 4.1.0,
- features.lock-heal
- features.grace-timeout
To check if these options are set use,
# gluster volume info
and ensure that the above options are not part of the Options Reconfigured:
section in the output of all volumes in the cluster.
If these are set, then unset them using the following commands,
# gluster volume reset <volname> <option>
Make sure you are not using any of the following depricated features :
- Block device (bd) xlator
- Decompounder feature
- Crypt xlator
- Symlink-cache xlator
- Stripe feature
- Tiering support (tier xlator and changetimerecorder)
- Glupy
NOTE: Failure to do the above may result in failure during online upgrades, and the reset of these options to their defaults needs to be done prior to upgrading the cluster.